SPLAV > Repair of vacuum pumps > Repair rotary vane vacuum pumps
Rotary vane vacuum pumps
Rotary vane vacuum pumps (Rotary vane vacuum pumps) allow to get a deep enough vacuum. Single-stage oil-injected models from 0.1 to 20 mbar (from 10 to 2000 PA), and two-stage oil capacity up to 0,0005 mbar (0.05 KPa). Given the fact that 1% of atmospheric pressure is about 10 mbar (1000 PA), generated by rotary vane pumps vacuum suitable for most industrial or research tasks. Performance vacuum pumps rotary vane type, is from 2 to 1500 m3/h.
These pumps are used in virtually all technologies. From food and medical to complex scientific equipment. They are quite easy to maintain and not expensive. However, require a certain precision workmanship and "on the knee" will not make them.
Below are the rotary vane vacuum pumps main used on the territory of the Russian Federation, international brands. Knowing the principle of operation of the pumps, and having experience of repairs, we can repair pumps of this type is the exotic origin.
We don't have to wait to purchase original spare parts. Very much we will be able to do it yourself and in a short time.
At the request of the Customer acceptance tests are conducted at our stand in the presence of representatives of the Customer. At the request of the Customer acceptance can be produced by TRC of the Customer
Independently deliver the pump to us for repair and back to the Customer.
To accept repair of rotary vane vacuum pumps:
HBP production of VAKMA, Kazan, Russia
EDWARDS - Atlas Copco (Velikobritaniya-Sweden)